Self-healing Techniques for RF and mm-Wave Transmitters and Receivers

With continuing advances in CMOS technology, feature sizes of modern Silicon chip-sets have gone down drastically over the past decade. In addition to desktops and laptop processors, a vast majority of these chips are also being deployed in mobile communication devices like smart-phones and tablets, where multiple radio-frequency integrated circuits (RFICs) must be integrated into one device to cater to a wide variety of applications such as Wi-Fi, Bluetooth, NFC, wireless charging, etc. While a small feature size enables higher integration levels leading to billions of transistors co-existing on a single chip, it also makes these Silicon ICs more susceptible to variations. A part of these variations can be attributed to the manufacturing process itself, particularly due to the stringent dimensional tolerances associated with the lithographic steps in modern processes. Additionally, RF or millimeter-wave communication chip-sets are subject to another type of variation caused by dynamic changes in the operating environment. Another bottleneck in the development of high performance RF/mm-wave Silicon ICs is the lack of accurate analog/high-frequency models in nanometer CMOS processes. This can be primarily attributed to the fact that most cutting edge processes are geared towards digital system implementation and as such there is little model-to-hardware correlation at RF frequencies.

All these issues have significantly degraded yield of high performance mm-wave and RF CMOS systems which often require multiple trial-and-error based Silicon validations, thereby incurring additional production costs. This dissertation proposes a low overhead technique which attempts to counter the detrimental effects of these variations, thereby improving both performance and yield of chips post fabrication in a systematic way. The key idea behind this approach is to dynamically sense the performance of the system, identify when a problem has occurred, and then actuate it back to its desired performance level through an intelligent on-chip optimization algorithm. We term this technique as self-healing drawing inspiration from nature's own way of healing the body against adverse environmental effects. To effectively demonstrate the efficacy of self-healing in CMOS systems, several representative examples are designed, fabricated, and measured against a variety of operating conditions.

We demonstrate a high-power mm-wave segmented power mixer array based transmitter architecture that is capable of generating high-speed and non-constant envelope modulations at higher efficiencies compared to existing conventional designs. We then incorporate several sensors and actuators into the design and demonstrate closed-loop healing against a wide variety of non-ideal operating conditions. We also demonstrate fully-integrated self-healing in the context of another mm-wave power amplifier, where measurements were performed across several chips, showing significant improvements in performance as well as reduced variability in the presence of process variations and load impedance mismatch, as well as catastrophic transistor failure. Finally, on the receiver side, a closed-loop self-healing phase synthesis scheme is demonstrated in conjunction with a wide-band voltage controlled oscillator to generate phase shifter local oscillator (LO) signals for a phased array receiver. The system is shown to heal against non-idealities in the LO signal generation and distribution, significantly reducing phase errors across a wide range of frequencies.

Aplicações e algoritmos de segurança rodoviária com o uso de sistemas de GPS e de comunicações WAVE

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Electrónica e Telecomunicações

Secure Communication in Cellular Networks: The Benefits of Millimeter Wave Mobile Broadband

This paper proposes millimeter wave (mmWave) mobile broadband for achieving secure communication in downlink cellular network. Analog beamforming with phase shifters is adopted for the mmWave transmission. The secrecy throughput is analyzed based on two different transmission modes, namely delay-tolerant transmission and delay-limited transmission. The impact of large antenna arrays at the mmWave frequencies on the secrecy throughput is examined. Numerical results corroborate our analysis and show that mmWave systems can enable significant secrecy improvement. Moreover, it is indicated that with large antenna arrays, multi-gigabit per second secure link at the mmWave frequencies can be reached in the delay-tolerant transmission mode and the adverse effect of secrecy outage vanishes in the delay-limited transmission mode.

Communication and the casualisation of nursing : a critical ethnography

The contemporary working environment is being rapidly reshaped by technological, industrial and political forces. Increased global competitiveness and an emphasis on productivity have led to the appearance of alternative methods of employment, such as part-time, casual and itinerant work, allowing greater flexibility. This allows for the development of a core permanent staff and the simultaneous utilisation of casual staff according to business needs. Flexible workers across industries are generally referred to as the non-standard workforce and full-time permanent workers as the standard workforce. Even though labour flexibility favours the employer, increased opportunity for flexible work has been embraced by women for many reasons, including the gender struggle for greater economic independence and social equality. Consequently, the largely female nursing industry, both nationally and internationally, has been caught up in this wave of change. This ageing workforce has been at the forefront of the push for flexibility with recent figures showing almost half the nursing workforce is employed in non-standard capacity. In part, this has allowed women to fulfil caring roles outside their work, to ease off nearing retirement and to supplement the family income. More significantly, however, flexibility has developed as an economic management initiative, as a strategy for cost constraint. The result has been the development of a dual workforce and as suggested by Pocock, Buchanan and Campbell (2004), associated deep-seated resentment and the marginalisation of part-time and casual workers by their full-time colleagues and managers. Additionally, as nursing currently faces serious recruitment and retention problems there is urgent need to understand the factors which are underlying present discontent in the nursing profession. There is an identified gap in nursing knowledge surrounding the issues relating to recruitment and retention. Communication involves speaking, listening, reading and writing and is an interactive process which is central to the lives of humans. Workplace communication refers to human interaction, information technology, and multimedia and print. It is the means to relationship building between workers, management, and their external environment and is critical to organisational effectiveness. Communication and language are integral to nursing performance (Hall, 2005), in twenty-four hour service however increasing fragmentation due to part-time and casual work in the nursing industry means that effective communication management has become increasingly difficult. More broadly it is known that disruption to communication systems impacts negatively on consumer outcomes. Because of this gap in understanding how nurses view their contemporary nursing world, an interpretative ethnographic study which progressed to a critical ethnographic study, based on the conceptual framework of constructionism and interpretativism was used. The study site was a division within an acute health care facility, and the relationship between increasing casualisation of the nursing workforce and the experiences of communication of standard and non-standard nurses was explored. For this study, full-time standard nurses were those employed to work in a specific unit for forty hours per week. Non-standard nurses were those employed part-time in specific units or those nurses employed to work as relief pool nurses for shift short falls where needed. Nurses employed by external agencies, but required to fill in for shifts at the facility were excluded from this research. This study involved an analysis of observational, interview and focus group data of standard and non-standard nurses within this facility. Three analytical findings - the organisation of nursing work; constructing the casual nurse as other; and the function of space, situate communication within a broader discussion about non-standard work and organisational culture. The study results suggest that a significant culture of marginalisation exists for nurses who work in a non-standard capacity and that this affects communication for nurses and has implications for the quality of patient care. The discussion draws on the seven elements of marginalisation described by Hall, Stephen and Melius (1994). The arguments propose that these elements underpin a culture which supports remnants of the historically gendered stereotype "the good nurse" and these cultural values contribute to practices and behaviour which marginalise all nurses, particularly those who work less than full-time. Gender inequality is argued to be at the heart of marginalising practices because of long standing subordination of nurses by the powerful medical profession, paralleling historical subordination of women in society. This has denied nurses adequate representation and voice in decision making. The new knowledge emanating from this study extends current knowledge of factors surrounding recruitment and retention and as such contributes to an understanding of the current and complex nursing environment.

Great expectations : a project by Boxcopy for Federation Square, Next Wave Festival 2008

Part of the Next Wave MEMBRANE Project, Great Expectations draws attention to the parallels between our expectations of art and new technology to make the world a better place. The theme of the 2008 Next Wave Festival, ‘Closer Together’, refers to the way society is ― for the better or for the worse ― becoming increasingly connected by media and communication technologies. Sceptical of the acclaimed social achievements of new technologies, Boxcopy: Contemporary Art Space, a Brisbane-based artist-run initiative, explores the futility of human activities, including art production and consumption, with a collection of works created by young and emerging Brisbane artists. Works for this project include: Early machines such as the Commodore 64 were tape-based, and hence had their games distributed on ordinary cassettes (2009) by Tim Kerr & Extra Features (2008) by Tim Woodward; Spine (2008), Joseph Briekers; Whiteout (2008), Channon Goodwin; Explosive Revelations (2008), Daniel McKewen.

Editorial of "Communication Research and Practice, 1(3)"

For the third issue of Communication Research and Practice, we bring together a mix of submitted content and papers presented at events that were hosted under the auspices of the International Communication Association. Dal Yong Jin captures the dynamic and contradictory elements of both convergence and transmedia storytelling, and the ‘Korean Wave’, in his paper on webtoons. Exploring this distinctive online form of transmedia storytelling, Jin considers its evolution from the perspectives of digital content, political economy, convergent media and digital labour, and the tensions that surround its potential expansion into global cultural markets.

The new screen ecology : A new wave of media globalisation?

There may be a new wave of media globalisation based on what may appear to be the virtually frictionless, near-global reach of major digital content delivery platforms, pre-eminently YouTube. This article looks at the scale and significance of this new screen ecology, considering its continuities and discontinuities with established understandings of media globalisation, arguing against the notion that it provides a platform for new forms of cultural hegemony. Focusing on the periphery rather than the centre, it uses Australia as a case study in asking the question: in what ways does it make sense to talk about a nationally demarked YouTube space?

Equivalent Circuit Analysis of Serpentine Folded-waveguide Slow-wave Structures for Millimeter-wave Traveling-wave Tubes

A simple equivalent circuit model for the analysis of dispersion and interaction impedance characteristics of serpentine folded-waveguide slow-wave structure was developed by considering the straight and curved portions of structure supporting the dominant TE10-mode of the rectangular waveguide. Expressions for the lumped capacitance and inductance per period of the slow-wave structure were derived in terms of the physical dimensions of the structure, incorporating the effects of the beam-hole in the lumped parameters. The lumped parameters were subsequently interpreted for obtaining the dispersion and interaction impedance characteristics of the structure. The analysis was simple yet accurate in predicting the dispersion and interaction impedance behaviour at millimeter-wave frequencies. The analysis was benchmarked against measurement as well as with 3D electromagnetic modeling using MAFIA for two typical slow-wave structures (one at the Ka-band and the other at the W-band) and close agreement observed.

Analysis of Rectangular Folded-Waveguide Millimeter-Wave Slow-wave Structures using Conformal Transformations

An analysis of rectangular folded-waveguide slow-wave structure was developed using conformal mapping technique through Schwarz's polygon transformation and closed form expressions for the lumped capacitance and inductance per period of the slow-wave structure were derived in terms of the physical dimensions of the structure, incorporating the effects of the beam hole in the lumped parameters. The lumped parameters were subsequently interpreted for obtaining the dispersion and interaction impedance characteristics of the structure. The analysis was benchmarked for two typical millimeter-wave structures, one operating in Ka-band and the other operating in Q-band, against measurement and 3D electromagnetic modeling using MAFIA.

Monolithic surface acoustic wave resonator oscillator

A monolithic surface acoustic wave (SAW) resonator operating at 156 MHz, in which the frequency controlling element is a Fabry–Perot type of SAW resonator and the gain element is a monolithic SAW amplifier (SiOx/InSb/SiOx structure located inside the SAW resonator cavity) is described and experimental details presented. Based on the existing experimental data, an uhf monolithic ring resonator oscillator is proposed. Journal of Applied Physics is copyrighted by The American Institute of Physics.

Monolithic surface acoustic wave resonator oscillator

A monolithic surface acoustic wave (SAW) resonator operating at 156 MHz, in which the frequency controlling element is a Fabry–Perot type of SAW resonator and the gain element is a monolithic SAW amplifier (SiOx/InSb/SiOx structure located inside the SAW resonator cavity) is described and experimental details presented. Based on the existing experimental data, an uhf monolithic ring resonator oscillator is proposed. Journal of Applied Physics is copyrighted by The American Institute of Physics.

Rise Time of a Surface-Acoustic-Wave Resonator

This paper presents the results of the rise time calculation of a SAW resonator. The total rise time is given by rise time = [(rise time of cavity)2 + (rise time of reflectors)2 + (rise time of IDT) 2 ]. 1/2 These rise times are calculated in terms of the effective length of the cavity , the characteristics of the reflector, and the number of finger pairs in the IDT. The rise time of a 38 MHz one-port resonator on Y-Z LiNb03 calculated using this approach is found to be in good agreement with experimental results .

Finite element modelling of lamb wave propagation in prestress concrete and effect of the prestress force on the wave’s characteristic

In order to assess the structural reliability of bridges, an accurate and cost effective Non-Destructive Evaluation (NDE) technology is required to ensure their safe and reliable operation. Over 60% of the Australian National Highway System is prestressed concrete (PSC) bridges according to the Bureau of Transport and Communication Economics (1997). Most of the in-service bridges are more than 30 years old and may experience a heavier traffic load than their original intended level. Use of Ultrasonic waves is continuously increasing for (NDE) and Structural Health Monitoring (SHM) in civil, aerospace, electrical, mechanical applications. Ultrasonic Lamb waves are becoming more popular for NDE because it can propagate long distance and reach hidden regions with less energy loses. The purpose of this study is to numerically quantify prestress force (PSF) of (PSC) beam using the fundamental theory of acoustic-elasticity. A three-dimension finite element modelling approach is set up to perform parametric studies in order to better understand how the lamb wave propagation in PSC beam is affected by changing in the PSF level. Results from acoustic-elastic measurement on prestressed beam are presented, showing the feasibility of the lamb wave for PSF evaluation in PSC bridges.